Holzma HPL11 Beam saw

used machine

Machine Overview

Introducing the Holzma HPL11 Beam saw

PANEL CUTTER, type HPL 11 Automatic panel saw for the splinterfree and accurate cutting of faced and unfaced panels of derived timber products and products to be processed as such.

Electronic control CADmatic version 3.0 The Holzma CADmatic is a machine control based on an industrial PC system. Graphic operator instructions as well as the optimized machine sequences are centrally coordinated by the

control. The CADmatic is networking-capable and can be connected by means of the appropriate options with any current data network. An integration into existing data bases can be offered as well.

Machine has rear loading.

Product Specification

Main saw motor(18.3 HP) 13,5 kW
Scoring saw motor(3 HP) 2,2 kW
Max. opening of clamps(5.1 inches) 130 mm
Saw blade diameter450 mm
Saw blade projection(4.9 inches) 125 mm
Saw carriage speed forward5 - 125 m/min
Saw carriage speed reverse, constant125 m/min
Program fence speed forw./reverse max.80 m/min
Compressed air6 bar
Voltage400 V/50 cycles
CE certifiedYes
min. speed at extract. outlet approx.28 m/sec
diametre of dust channel connection200 mm
diametre of pressure beam connection150 mm
diametre of pressure beam connection80 mm
Cutting length(149.6 inches) 3800 mm
Cutting width (travel distance of progam fence)(149.6 inches) 3800 mm
Lift table 3800 x 2200 mm, max. load7 to Stack height of lift