Our Price
£POA
The price for this product is on application only. Please contact us to discuss the options available to you.
For sales and advice call today!
01455 840224
About the Osama CLR/2 Roller Press
The roller press or calendar sheeter in the CLR/2-CLR/4 and P2R versions is used to exert the correct pressure on various types of sandwich panels, such as for example MDF, chipboard, EPS, OSB, etc…clad with various types of finishes such as laminates, aluminium, plastics, glass, high gloss, finish foil, PVC, etc. The pressure is exerted by means of pistons installed on the ends of the structure, in the upper section of the sliding supports to set the thickness.
For further information please contact our sales team on 01455 840224.
Osama CLR/2 Roller Press Options
- Mechanical or electronic variable speed drive with monitor
- Automatic lifting of the upper roller with digital position reference and monitor
- Track wheels to remove the inline press for periodical maintenance
- Rollers that are bored in the heads and rotating joints to heat or cool the rollers from the inside, based on production requirements
- Press rollers may be rubber rollers or rollers with a low-thickness chromium covering
- Reel holder support fitted in the upper part of the structure, with caliper brakes and idler rollers to tension the coating materials on reels, manual adjustment of reel centering
Osama CLR/2 Roller Press Specification
| Working width |
1300 / 1400 / 1600mm |
| Diameter of rollers |
216 / 300mm |
| Workable panel thickness |
0-100mm |
| Height of work surface |
900mm + / - 20mm |
| Installed power |
1.1 Kw |
| Pressure exerted per cm2 |
8 Kg. ca. |
