Osama S4R 1600 Automatic 4 Roller Gluer with 1 Motor

Our Price £ POA

The price for this product is on application only. Please contact us to discuss the options available.

For sales and advice call today!

01455 840224

Osama S4R 1600 Automatic 4 Roller Gluer with 1 Motor Specification

Working width 1600mm
Working height 0-100mm
Spreading roller diameter 210mm
Feed speed 22 MI.1'
Motor power 1.1Kw
Height of working surface 870mm
Length 1000mm
Width 2400mm
Height 1450mm
Weight 780Kgs

Osama S4R 1600 Automatic 4 Roller Gluer with 1 Motor Features

  • SPREADING is uniform and constant throughout the working width, thanks to a technological innovation and to special dampers compensating the differences of non calibrated panels
  • SPREADING ROLLERS coated with a suitable layer of special “antiacid synthetic rubber” give the possibility to perform several grindings and therefore give a long life.
  • HOMOGENOUS BATCHING of the glue to be applied obtained by means of covered with ebonite ground rollers….
  • SUITABLE PROTECTION DEVICES: For all moving parts guarantee the operator’s utmost safety
  • ELECTRICAL SYSTEM: Fully sealed in compliance with CE regulations, with control button pad, voltage 24 volts

Osama S4R 1600 Automatic 4 Roller Gluer with 1 Motor Options

  • Available in: 1300mm and 1400mm working width
  • Introducing rollers
  • Extracting roller
  • Automatic washer
  • Speed controller
  • Automatic lifting device of upper roller
  • Assemblying of wheels

About the Osama S4R 1600 Automatic 4 Roller Gluer with 1 Motor

The S4R roller gluer is without doubt superior to the 2 roller model, solely for the fact that the roller regulating the quantity of glue dispensed is ground.
A more robust structure plus a 1.5 HP motor are designed for more demanding customers, in particular where applying glue in the following cases is concerned: panels, including heavy panels, of chipboard, MDF or plasterboard; panels to be clad with thin veneer, smooth laminates, thin aluminium sheets, etc.
Top and bottom glue dispensing is adjusted respectively by an external handwheel and with position reference.
The dispenser rollers can be of approx. 100 shore ebonite hard rubber or clad in hard chrome in the case of particular glues or aggressive catalysers.
We can also perforate the dispenser rollers on the inside and connect them via rotating joints mounted at the ends to a refrigeration system.
This gluer is often selected because it has an excellent quality/price ratio.
It can also be fitted with top and bottom roller glue feeding systems and preset for working in a pressing line.

For further information on this machine and options available, please contact on sales team on 01455 840224