Osama S4R-P 1600 Automatic 4 Roller Gluer with 2 Motors

new machine

Machine Overview

Introducing the Osama S4R-P 1600 Automatic 4 Roller Gluer with 2 Motors

The Osama S4R-P 4 roller gluer, without doubt superior to the S4R model, enables the quantity of glue dispensed to be uniformly adjusted. This includes gluing MDF panels and paper clad panels, clearly allowing for the type of lining on the rollers, which must be suitable for the type of production envisaged, often involving extremely thin veneers. By slightly increasing the force on the dispenser rollers and carefully adjusting the thickness and the inverter drive speed an acceptable compromise can be achieved for various applications.
The heavy structure and also the roller cores, designed with greater thickness compared to previous models, enable high work rates to be sustained without incurring any particular problems.
Useful working widths of 2200 mm can be achieved using these materials, increasing the installed horsepower and directly driving the spreader rollers.
Replacing the rollers for maintenance thus becomes a more simple operation, with supports divided in half and easy bayonet coupling.
Clearly equipped with clean contact consent to the electric control panel for line consent.
This 4 roller version gluer is available with 4 drive motors, two for the spreaders and two for the dispensers, as an optional.
Various accessories are available, even for cases where the pieces to be glued are extremely short. This gluer is particularly suitable in several production fields, for example in the building sector, for technical, expanded and soundproofing panels, for plasterboard, etc…. and also for sponge and mattress production. Always ensure that the unit is configured correctly, especially for the particular type of glue to be used.

For further information on the options available, please contact our sales team on 01455 840224

Product Features

  • SPREADING is uniform and constant throughout the working width, thanks to a technological innovation and to special dampers compensating the differences of non calibrated panels
  • SPREADING ROLLERS coated with a suitable layer of special “antiacid synthetic rubber” give the possibility to perform several grindings and therefore give a long life.
  • MICROMETRIC BATCHING: of the glue to be applied obtained by means of covered with ebonite and ground rollers, controlled by an adjustable hand wheel
  • SUITABLE PROTECTION DEVICES: for all moving parts guarantee the operator’s utmost safety
  • ELECTRICAL SYSTEM: Fully sealed in compliance with EC regulations, with control button pad, voltage 24 volts.

Product Options

  • Introducing rollers
  • Extracting roller
  • Automatic washer
  • Speed controller
  • Automatic lifting device of upper roller
  • Assemblying of wheels
  • Available in working widths: 1300mm, 1400mm, 1800mm, 2000mm, 2200mm

Product Specification

Working width1600mm
Working height0-100mm
Work surface height890mm
Spreading roller diameter250mm
Feed speed22 MI.1'
Motor power1.5 Kw
Length1100mm
Width2400mm
Height1500mm
Weight900 Kgs

Downloads