The closed halving joint cutter KSF-2/E is equipped with a comfortable computer control. After the programs have been stored it can cut all existing closed halving joints for windows, doors, furniture, low walls, radiator panelling etc. The workpiece is milled by three simultaneously running special cutters which are computer controlled. An additional grooving unit is cutting the optional groove in front. The milling distances can be stored in up to 100 programs. The workpieces are fed automatically.
The grooving units can be also programmed to cut through the workpiece, i.e cut it to length.
With the standard tools (adjusment range 7,5 - 14,5mm) the cutter can mill profiles of the following dimensions: Min 10mm x 10mm depth, Max 56mm width, Max 74mm height
|Power Supply||415V / 50Hz|
|Power||4,0 kW (KSF-2/E-4)|
|Electric Energy||c.3.6 KW/h|
|Air Pressure||c.71 per milling at 6 bar|
|CONNECTIONS FOR OPERATING AND MAINTENANCE||;|
|Electric Connection||Threephase current accord to type plate|
|Pneumatic Connection||1/4 ' (plastics), 6-8 bar (87-116 psi)|
|Suction||Nominal width 150mm|
|The machine must be connected to a suitable vacuum cleaner||min. 20m/s suction air speed on the connection piece|