Our Price
£POA
The price for this product is on application only. Please contact us to discuss the options available to you.
For sales and advice call today!
01455 840224
About the Tigerstop TigerAngle
The Tigerstop TigerAngle incorporates a Graule ZS170 or ZS200 Cross-cut saw with Tigerstop automation to control the angle and length of cut. It designed for use in the wood, pvc and aluminium industry for making 90 degree and angle cuts speed and repeat accuracy.. The operator will be responsible for loading the material onto the machine, offloading, and pulling the saw head to perform the cut. (Full automation is available)
The Graule Saws can also be tilted to make compound cuts. (Tigerstop Tigerangle 3D with full control of vertical tilting, or by manual adjustment for Vertical angles). The main saw support arm is equipped with 4 bearing sleeves for a perfect linear guidance of the saw to obtain cuts with a high accuracy. Due to its flexible range of angles the saw can be used in a wide variety of application in the wood, PVC and Aluminium industry.
In combination with a Tigerstop System you will have an installation that enlarge your production and efficiency.
Tigerstop TigerAngle Options
- Tiger label printer
- Pneumatic clamping mechanism. 2 x vertical
- With option Tigerdrive to automate Vertical inclination (3D), PC with TigerAngle / Beamworks software and pneumatic clamping mechanism
- LaserLine for indicating the saw cut (Line length 300mm)
- Pressure regulator for vertical clamps
- Mist spray for Aluminium cutting
- Special guide rail at 90 degrees for cutting sharp angles
- Saw blades
- Pneumatic actuation of the saw head to fully automate the cutting cycle - this option requires the large guard to be fitted infront of the saw as in the video to meet regulations
- Infeed and outfeed loading / off loading systems
- Two hand control and safety hood
Tigerstop TigerAngle Specification
| Motor |
400V/ 50 HZ 2 or 3 kW |
| Sawblade diameter |
420mm (ZS170) 520mm (ZS200) |
| Sawblade boring |
40mm |
| Rotation |
3500 rpm |
| Waste extraction diameter |
95mm |
| Weight without base |
105Kg |
| Cutting capacity at 90º |
450mm (ZS!70) 420 (ZS200 - 500mm on request for ZS200) |
| Cutting capacity at 45º |
310mm (ZS170) 295mm (ZS200 - option for 310mm) |
| Cutting height at 90º |
170mm (ZS170 200mm (ZS200) |
| Cutting height at 45º tilt |
115mm (ZS170) 140mm (ZS200) |
| Angle adjustment range |
45-90-25º |
| Angle adjustment range for tilt (3D model only) |
45-90-60 |
