TigerStop SawGear

Automates your length stops quickly and accurately!
TigerStop SawGear photo

About the TigerStop SawGear

Takes only a few minutes to set up and learn

TigerStop SawGear is an automatic length stop that you can easily mount on your existing crosscut saw, or drilling/punching machine.

This solution replaces your manual stops and tape measure when setting lengths and carrying out complex miter work. The SawGear enables you to work quickly and accurately, every time.

From £3,625.00 + VAT

TigerStop SawGear Base Specification

The TigerStop SawGear is available in three sizes, 3m, 4m and 5m. The SawGear is an affordable solution for smaller workshops who wish to improve accuracy and speed of production. A key benefit of the SawGear is that is can be used in the workshop and also taken on site, due to quick set up times and ease of use.

SawGear gives you a competitive advantage. Simply attach your SawGear to existing equipment and experience significantly faster completion times, improved accuracy and overall job quality with reduced waste and rework.

Become more productive: SawGear sets up in minutes, is simple to use, is accurate to 0.2mm, easily portable, easily moved from one machine to another:or to onsite install - making your you or your staff more productive.

  • bullet arrow icon Portable and Job Site Rugged: Sets up in minutes and built rugged enough for job site use
  • bullet arrow icon Accurate: Plus or minus 0.2mm repeatable accuracy for dead-on cuts every time
  • bullet arrow icon Adaptable: Fits your mitre saws and mitre saw stands either to the right or left of the saw
  • bullet arrow icon Password Protected
  • bullet arrow icon Stores Cut Lists: Ten lists of up to 10 cut dimensions each; great when working on identical units
  • bullet arrow icon Crown & Mitre Pro: Takes the pain out of cutting crown and makes casing windows and doors a snap
  • bullet arrow icon Job Site Use: Anti-pinch system helps on the job site
  • bullet arrow icon Speed: 40m/min. You won’t be waiting to make a cut
  • bullet arrow icon Works the Way You Do: Enter feet, inches, fractions or feet, inches, and decimal fractions, or switch to metric mode
  • bullet arrow icon Voltage: 110 VAC (Transformer from 240v is supplied with the SawGear)
  • bullet arrow icon Energy saving sleep mode
  • bullet arrow icon Offset key
  • bullet arrow icon Language selection : English, Spanish, French

Automates your length stops quickly and accurately

Is it too time-consuming to set up manual stops and are you looking for a way to make your work more productive and accurate? The SawGear from TigerStop offers the solution! This automatic length stop positions easily and quickly and also makes complex miter sawing possible.

What can you do with the SawGear?

The SawGear has various functions and can be used in the wood, aluminium, metal and plastic industries.


  • Adjustable cutting range
  • Cooling spray
  • Optimisation software
  • Bundle processing
  • Easily search for faults with a smart connection panel
  • Download material list
  • Pushing capacity with the TigerStop of up to 80 kg
  • TigerStop Heavy Duty pushes up to 600 kg and up to 24 metres
These are the advantages

Save time
You can increase your productivity considerably with the SawGear's automated system. The machine is easy to use and positions your material consistently and precisely. This will quickly reduce your processing times by 30% because you will have to walk back and forth to adjust the machine a lot less. After all, the measuring work and the setting of the stop are done automatically.

Work accurately
With the SawGear you always process your material exactly to the right size. With a repeat accuracy of 0.2 mm, you are assured of dimensionally consistent work, without exception. In addition, the SawGear with a memory of 10 lists is extremely suitable for carrying out repeat orders quickly and efficiently.

Easy to assemble on your existing machines
The SawGear is so quick and easy to install that you can get started in a matter of minutes. The stop can be installed on the left or right. You can choose a smooth table or a rolling table, but the SawGear can also easily be placed on your existing table.

TigerStop Exclusives

As the UK's TigerStop Dealer, R&J Machinery is pleased to present a selection of exclusive benefits that no other UK supplier can provide. To discuss TigerStop exclusives, please call our office team on 01455 840224.

Used TigerStop

R&J Machinery are pleased to offer a selection of used TigerStop machines that have been fully serviced and prepared by our TigerStop-trained engineers. These machines will provide amazing service for years to come.

Here is a small selection of the used TigerStop in our showroom. Stock moves quickly so please act fast.

An abstract photo of a TigerStop machine in action
TigerStop Servicing

Woodworking machines are only as good as their preparation. Our in-house team of trained engineers are on-hand to visit your workshop and provide you with scheduled TigerStop servicing, ensuring that your machines are optimised for maximum performance and continue to meet safety standards.

A photo of a man working with his TigerFence
A photo of a female woodworker with her laptop in a workshop
TigerStop... Fast and accurate... every time

TigerStop was founded in a garage in 1994 by an ambitious husband and wife duo who wanted to help manufacturers like themselves reduce waste, measure material more accurately, and ultimately produce higher quality goods more efficiently.

TigerStop has since become a global leader in automated stop/gauge and pusher systems under the TigerStop and SawGear brand names. Headquartered in Washington State, TigerStop is a U.S. manufacturer with a second manufacturing and distribution facility in Europe, a distribution network spanning six continents, and product support in five languages.

R&J Machinery is proud to be the UK Agent for TigerStop

R&J Machinery has a long relationship with TigerStop dating back over 20 years, and we are proud to be the Main UK Agent and Sole UK Importer for their machines and spares. We are one of the top-tier suppliers of TigerStop products across all of Europe, and our team of service and repair engineers travels to TigerStop EU in Holland annually for training on the latest machinery developments.

You can be sure that our team are fully qualified to offer you guidance on the ideal TigerStop setup for your workshop, and are fully qualified to service and maintain your existing machines to the highest standard. We look forward to talking to you soon about all things TigerStop!

For sales, servicing, parts, advice and support, please call our office team on 01455 840224.

A photo of the R&J Machinery team
A photo of an R&J Machinery engineer repairing a machine
A photo of a man using a panel saw
Like the TigerStop SawGear? Book a Demo!
Test-drive our machinery in our 16,000 sq ft facility

Our machines are ready for your inspection and testing at short notice in a purpose-built environment. Why not visit us at our location in Leicestershire to compare and contrast similar machines, and have our experts show you the key differences between models and brands?

Request TigerStop Servicing Information

R&J Machinery's in-house team of trained engineers are on-hand to visit your workshop and provide you with scheduled TigerStop servicing. To request more information about the servicing packages we offer, please speak to our knowledgeable team on 01455 840224 or complete this enquiry form.