Barbaric Vacuum Lifter uniWood with Integrated Chainhoist

About the Barbaric uniWood

The Barbaric uniWood, can be used for vertical or horizontal transport of flat wooden boards with commercial quality (chipboards, coated boards, natural wooden boards) up to a size of 3000mm x 2100mm.

Basic equipment complete with chain hoist and corresponding safety system (vacuum gauge and manual slide valve with mechanical safety).

With 2 suction cups Ø 270mm on an adjustable suction beam (size of suction beam: 1500mm).

Barbaric Vacuum Lifer uniWood Features

Tick bullet point Design with pneumatic tilting system with tilting range of 90°
Tick bullet point Vacuum is produced by a pneumatic pump with ventury system
Tick bullet point For hook in to customers trolley an eyelet is provided on the hoist

Barbaric Vacuum Lifer uniWood Options

Tick bullet point Uniwood suction beam for thin plates for 150Kg
Tick bullet point Suction beam for doors (1500mm x 1200mm)
Tick bullet point Suction beam for iron sheets and Plexiglas (2500mm x 1200mm)
Tick bullet point Reinforced design for permeable boards - Size of suction beam 150mm, pick up to 250Kg
Tick bullet point Comfortable control system
Tick bullet point Safety system
Tick bullet point Lifter without tilting

Barbaric Vacuum Lifter uniWood with Integrated Chainhoist Specification

Hoisting speed 2/8 m/min by electric chain hoist
Lifting height approx. 3m
Operating voltage 3 x 400v / 50Hz
Operating pressure 6 bar filtered compressed air requested
Lower edge of running rail approx. 4.5m (out of scope)
Air consumption approx. 7 NI/sec
Safe working load 150Kg