Used Italpresse Hydraulic Frame Clamp with Axis Control Mod Features
Main frame and pressure beams are made of high thickness steel profiles, CNC machined in order to grant superior stiffness and precision.
Two double action vertical cylinders for top beam movement, controlled by a solenoid valve
Two double action horizontal cylinders for side pushers movement, controlled by solenoid valves
Two horizontal side fences, with fast repostioning mechanism
Bottom beam adjustable at three (five) levels:
380mm / 680mm / 980mm for mod. 3000mm x 1700mm and 3000mm x 2000mm
420mm / 720mm / 1020mm for mod. 3500mm x 2000mm
420mm / 720mm / 1020mm / 1170mm / 1320mm for mod. 3500mm x 2500mm
Automatic lock and unlock of bottom beam
PLC controlled working cycles
Safety photo eyes
Used Italpresse Hydraulic Frame Clamp with Axis Control Mod Options
Horizontal upper and lower beams
Beams for shutters with pins complete with micrometric adjustment for the centering of the pieces - pitch upon request - useful length 2600mm / 3100mm (not compatible with the blocking device)
Bars for shutters with pins complete with micrometric adjustment for the centering of the pieces with electronic cycle for the push in and out in automatic
Bar in two parts with variable pitch
Special device to press oblique and triangular frames
Extra horizontal cylinder and stop for doors/frames with a center mullion for frames press of 3000mm - the minimum useful height will be 490mm
Extra horizontal cylinder and stop for doors/frames with a center mullion for frame press of 3500mm - the minimum useful height will be 490mm
Locking device for the single elements of the frame, composed of 5 air cylinders, to eliminate the need of manual pre-assembling
Locking device for the single elements of the frame, composed of 9 air cylinders, to eliminate the need of manual pre-assembling
Set composed by 6 jigs with magnet inserts to be used with prefinished window frames
About the Used Italpresse Hydraulic Frame Clamp with Axis Control Mod
The Italpresse hydraulic frame clamp with axis control mod. Universal/CN, comes complete with a touch screen operator interface TS/500 to program and monitor the working cycle with the following functions: 6" colour touch screen display, Digital set and read of vertical and horizontal pressures independantly, Extreme low pressure setting in case of light or pre-finished frames, Digital set and read of press time to activate the auto opening with on-off switch, Cycle selector switch with three modes: manual, special cycle with impulse movement of top beam, automatic, Special opening in case of light or pre finished frames, Adjsutable auto opening, Digital set and read of the vertical dimension with two electronically controlled axis, Electronic flatnesscontrol of top beam, Auto positioning of side pushers with auto read of part length, Working program storage and Self diagnostic for errors.
It will also come equipped with a hanging push button strip for machine operating, with the following functions: Manual movements: left/right, up/down, Vertical top beam positioning, Horizontal positioning, Automatic cycle start, Special cycle start, Fast positioning push button and safety e-stop.
For further details please contact R&J Machinery on 01455 840224, as other specifications are available.
Used Italpresse Hydraulic Frame Clamp with Axis Control Mod Specification