Used Sedgwick TESH3

 

used machine

Machine Overview

Introducing the Used Sedgwick TESH3

Key Features
Three separately powered heads
Two main heads equipped with 4 replaceable shear-cutting knives and 2 spur cutters
Cam action work clamp
Invaluable in any production workshop

Description

This Tenoner has two separately powered heads which enable both sides of the tenon to be cut in one pass, the shoulders being offset if required. The heads are each equipped with 4 replaceable shear-cutting knives, two spur cutters for clean shouldered tenons, a mechanical digital readout on the head and are powered by two 2.2kW Motors. An additional third 4kW motor is provided to drive a scribing head for accurately scribed individual mouldings. A scribing head is an optional extra. The TESH has cam action clamping levers for fast, secure work holding. Made by Sedgwick to their usual high standards this machine will prove invaluable in any production workshop. Each block has 4 shear cut replaceable knives and 2 spur cutters. 1 scribing cutter and chip limiters is provided in the bottom heads.



Diameter Of Tooling Bottom Block - Supplied
Diameter Of Tooling Scribing Head - 210mm
Diameter Of Tooling Top Block - Supplied
Dust Extraction Outlet - 150mm
Horizontal Adjustment Bottom Block - N/A
Horizontal Adjustment Scribing - 30mm
Horizontal Adjustment Top Block - ±32mm
Length Of Shaft - 75mm
Main Cutter Heads - 2 x 175mm x 60mm
Max Length Of Tenon Single Pass - 155mm
Max Length Of Tenon Two Passes - 205mm
Model - TESH
Nett Weight - 470kg
Noise Level Db 1m - N/A
Overall L X W X H (1,320 x 1,020 x 1,560mm)
Scribing Head Shaft Diameter - 30mm
Table Size - 800 x 310mm
Timber Cap Height Fence 45 - 130mm
Timber Cap Width Fence 45 - 195mm
Timber Cap Width Fence 90 - 310mm
Vertical Adjustment Bottom Block - 0-60mm
Vertical Adjustment Scribing Head - 95mm
Vertical Adjustment Top Block - 0-100mm