The Italpresse hydraulic frame clamp with axis control mod. Universal/CN, comes complete with a touch screen operator interface TS/500 to program and monitor the working cycle with the following functions: 6" colour touch screen display, Digital set and read of vertical and horizontal pressures independantly, Extreme low pressure setting in case of light or pre-finished frames, Digital set and read of press time to activate the auto opening with on-off switch, Cycle selector switch with three modes: manual, special cycle with impulse movement of top beam, automatic, Special opening in case of light or pre finished frames, Adjsutable auto opening, Digital set and read of the vertical dimension with two electronically controlled axis, Electronic flatnesscontrol of top beam, Auto positioning of side pushers with auto read of part length, Working program storage and Self diagnostic for errors.
It will also come equipped with a hanging push button strip for machine operating, with the following functions: Manual movements: left/right, up/down, Vertical top beam positioning, Horizontal positioning, Automatic cycle start, Special cycle start, Fast positioning push button and safety e-stop.
For further details please contact R&J Machinery on 01455 840224, as other specifications are available.
|Internal dimension||3000mm x 1700mm|
|Min useful dimension||250 x 340h|
|Max horizontal thrust||3200Kg|
|Max vertical thrust||16000Kg|
|Horizontal cylinders diameter||50mm / 35mm|
|Vertical cylinders thrust||100mm / 60mm|
|Hydraulic power group||3Kw|
|Vertical cylinders stroke||800mm|
|Horizontal cylinders stroke||1200mm|